LED Lamp and Display |
 Epoxy Casting Compound for LED Lamps |
|
GIN-COAT 5270 is
a fast curing epoxy resin for casting for LED devices. The mixed compound has a low
viscosity enough to cast at room temperature and becomes gel in a short time above 120
degree.
The casting has transparency, moisture resistance and high mechanical strength. |
Produc |
DC-5270 |
DH-5270 |
DCL-5270 |
DF-5270 |
Epoxy Resin |
Acad anhydride |
color dye |
Diffusant |
Viscosity |
1000-6000 cps |
100-600 cps |
4000-5000cps |
8000-12000cps |
Mixing Ratio |
100 |
100 |
2-6 |
2-15 |
Cure schedule |
(135-145C)/40-50min + demold +
(125-135C)/3 hrs |
Mixed Viscosity |
300-1000 cps at 25C
100-300 cps at 40C |
Pot life |
6 hrs at 40 C (< 10,000cps) |
Shelf life |
6 month |
Color |
     |
GIN-COAT 5270 can be colored by adding specific color
dye concentrates(DCL-5270) and the emitted light by the diodes can be diffused by adding
particulate fillers.
Three dye concentrates(red, green, yellow) and a diffusant concentrate are available for
the use with GIN-COAT 5270 LED casting system. |
Epoxy Casting Compound for LED
Displays |
|
GIN-COAT 5270DIS is a fast
curing epoxy resin for casting for Display devices. The mixed compound has a low viscosity
enough to cast at room temperature and becomes gel in a short time above 80C. The casting
has transparency, moisture resistance and high mechanical strength. |
Produc |
DC-5270DIS |
DH-5270DIS |
DCL-5270 |
DF-5270 |
Epoxy Resin |
Acad anhydride |
color dye |
Diffusant |
Viscosity |
1000-2000 cps |
100-600 cps |
4000-5000cps |
8000-12000cps |
Mixing Ratio |
100 |
100 |
2-6 |
2-15 |
Cure schedule |
(80-90C)/4 hrs |
Mixed Viscosity |
100-300 cps at 25C |
Pot life |
4 hrs at 40 C (< 10,000cps) |
Shelf life |
6 month |
|
